14'W x 36'L x 15'H-(RV/Boat Garage)14'W x 36'L x 15'H-(RV/Boat Garage)

14’W x 36’L x 15’H-(RV/Boat Garage)

$3,150.00 $2,899.00

The 14x36x15 instant garage is popularly used as an rv boat garage but can fulfill a variety of uses. The gambrel shape provides additional storage space with a high point in the center of the structure to fit your tall vehicles. Store your RV, boats, cars, trucks, commercial equipment, and other investments with confidence that they will be safe.

This product comes with a 10 oz. cover that is built to withstand the harsh elements of weather. The double zipper doors on either end of the garage allow for convenient drive-thru access. Our frames are made of heavy-duty galvanized steel and come with a cable earth anchor kit to provide extra reinforcement for your structure. Extend the life of your most expensive investments with outdoor protection that lasts.



  • 10 oz .Cover
  • 2 Double Zipper Doors-12’Wx12’8″H (9’3″W at top)
  • 22 Cable Earth Anchor Kit
  • 2-3/8″ Galvanized Steel Frame
  • Roll-up Door Kit for front door included


Warranty *

Ventilation Kit

Ventilation Kit *

Yes : ($50.00)


SKU: N/A Category:


Our pre-drilled frames are easily assembled with minimal hand tools. (Unlike other products where drilling or field cutting is required). Main cover and doors are made from long life UV Resistant and Fire Retardant Poly with Fabric Backing. All fabric components feature heat welded seam construction. Unit features double zipper doors on both ends to allow drive though capability, and good ventilation. Each door contains a pocket for a rigid pole and grommets for securing them up during use. Each unit comes equipped with permanent anchor system and one door roll-up kit.

The 14’Wx36’Lx15’H RV/Boat Round shelter is ideal for protecting large vehicles, such as motor homes, boats, and trailers. Featuring front and back doors, entering or exiting the shed with a vehicle is effortless. A roll-up door and full anchoring kit are included with the unit.

The 14’Wx36’Lx15’H RV/Boat Round shelter provides superior protection, without sacrificing portability. The massive dimensions means the shelter can easily accommodate large vehicles. The centre-ridge roofline ensures that height is not an issue, with extra space along the side enclosures an added benefit.

Assembling a Rhino Shelter requires minimal effort and tools. The frame of the shed is designed in a specific manner, so that no cutting or drilling is required.

The shelter is made using rugged and long-lasting industrial grade 10oz. fabric and is available in two distinct colours. The entire cover, including doors, are constructed with a CPAI-84 rated Poly with woven backing, which is UV resistant and fire retardant. The outer and inner layers sandwich a special layer in between called Inner Black Scrim. This layer has a coating that prevents any sunlight from infiltrating the material. All the components for the frame are manufactured using galvanized steel.

Ratchet straps come standard with Rhino Shelters. The shelter cover never loosens or sags, thanks to the strong webbing material used in the ratchet strap. The tight fit allows the ratchet straps to withstand much higher snow loads than ordinary rope. Every door contains a pouch to accommodate poles. Earth anchors and 36″ stainless steel tether and drive rod come with the package.

Exclusive RV/Boat Garage Features

  • Heavy Duty Galvanized Finish on All Steel Frame
    Components for Maximum Strength & Long Life
  • Easy Bolt Together Design – all Pre-drilled & Cut
  • Wind Brace Support on Both Sides
  • Two(2) Double Zipper Doors with Bottom Pockets
  • One (1) complete Roll-up Door Kit
  • Protective Plastic Tube End Caps – All Open Ends
  • Standard Thread Plated Hardware Kit with Retaining
    Nuts & Protective SS Washers
  • Quick Assembly Wrench included
  • Heavy Duty Poly Rope for Main Cover Tie Down
  • Heavy Duty Grommets on Cover & DoorsTwenty-Two (22) permanent anchors included
  • Five(5) Box Shipment
  • Average install time – 8 to 10 hours

Exclusive RV / Boat Features

  • Heavy-Duty Galvanized Finish on All Steel Frame Components
  • Two (2) Double Zipper Doors Standard
  • Wind Brace Support on Each Side
  • Ratchet Straps for a Drum Tight Fit
  • One (1) Roll-up Door Kit
  • Standard Thread Plated Hardware Kit with Retaining Nuts & Protective Stainless Steel Washers
  • Quick Assembly Wrench
  • Heavy Duty Poly Rope for Main Cover Tie Down
  • Heavy Duty Grommets on Cover & Doors
  • Twenty-two (22) Permanent Anchors
  • Complete Anchoring System
  • 10oz., CPAI-84 Polyethylene Fabric Backed Cover and Doors
  • All Pre-Drilled, Easy Bolt Together Assembly
  • Average Install Time: 8 to 10 Hours
  • 1043 lbs. Shipped in Eight (8) Boxes Via Motor Freight
  • Nominal Size
    • 14’ Wide x 36’ Long x 15’ High
  • Arches
    • Ten (10) on 48” Spacing 2-3/8” Frame Members
  • Standard End Door Size
    • 12’9″ Width x 12’6″ Height
    • 8’6″ Wide at Top
  • Box Dimensions
    • Box 1: 86″ Long x 27″ Wide x 5″ High
    • Box 2: 86″ Long x 27″ Wide x 5″ High
    • Box 3: 86″ Long x 27″ Wide x 8″ High
    • Box 4: 74″ Long x 21″ Wide x 5″ High
    • Box 5: 68″ Long x 21″ Wide x 5″ High
    • Box 6: 68″ Long x 21″ Wide x 5″ High
    • Box 7: 50″ Long x 21″ Wide x 5″ High
    • Box 8: 67″ Long x 24″ Wide x 9″ High
  • Available Colors
    • Outer Colors: Green and Grey
    • All Interiors: White Only
  • Shipping Weight
    • 1043 lbs shipped in Eight(8) boxes Shipped via Motor Freight
  • Main Cover
    • UV Protected Fabric Backed Poly Material 10 0z. Weight. 22 Mil. Thick.
  • Fire Retardant Standard
    • Main Cover & Doors meet CPAI -84 Section 5
  • Anchors
    • Twenty-Two (22) 36” Anchor with U-Bolts & Drive Rod Std.
  • Stock Number
    • 14x36x15(*)RSK
    • * – Color Prefix: Green, Grey etc.
  • the product spec sheet
  • the assembly manual
Empty tab. Edit page to add content here.