Sale!

12’W x 24’L x 8’H – Greenhouse

$1,250.00 $949.00

– UV Protection
– Fire Rated (CPAI -84 Section 5)
– Easy Bolt Together Assembly
MDM Products, LLC provides the best in instant and portable protection for any purpose.

Typical uses include:

  • Vehicle protection and storage
  • Equipment / material storage
  • Workshop areas.
Clear

Warranty

Warranty *

SKU: N/A Category:

Description

The house style provides extra space along the sides of the enclosure, with maximum height near the center ridge. The pre-drilled frame is easily assembled with minimal handtools. All frame components are made from heavy duty galvanized steel. Main cover and doors are made from long life UV Resistant, Fire Retardant Polyethylene with woven backing.

All fabric components feature heat-welded seam construction. Unit features double zipper door on BOTH ENDS to allow drive-through capability, and good ventilation. Each door contains a pocket for a rigid pole at the base. The long lasting cover is designed with full flap provides for run-off of rain or melting snow and diverts water from entering through the perimeter of the cover. Each unit comes completely equipped with a set of earth anchors with 36″ stainless steel tethers and a 36” drive rod to secure the unit at each corner and each frame arch.

The 12’Wx24’Lx8’H Round Hobby Greenhouse combines affordability and ergonomics to provide you with an ideal unit. Structural frame components do not require any drilling and come ready for installation right out of the package. One full-width door and one 36″ manway door are included with the unit.

The Instant 12’Wx24’Lx8’H Round Greenhouse is ideal for providing protection to any kind of cultivation. The round-style shelter comprises of superior-quality translucent fabric that provides the appropriate amount of light diffusion and can extend the annual growing season by up to 3 months.

End Panels sold Separately

The Rhino Shelters House-style Run In shelter is designed to provide protection for livestock, while not sacrificing ventilation. The house-style roof prevents any water logging or snow build-up. Assembling a Rhino Shelter requires minimal effort and tools. The frame of the shed is designed in a specific manner, so that no cutting or drilling is required.

The fabric for the main cover is CPAI-84 rated and manufactured using fire retardant, UV resistant poly, featuring woven backing and heat-welded seams. The outer and inner layers sandwich a special layer in between called Inner Black Scrim. This layer has a coating that prevents any sunlight from infiltrating the material.

Cable earth anchors and 36″ drive rod are included in the package. End panel doors sold separately.

As far as single tube construction is concerned, heavy galvanized steel ensures that the frame is the heaviest possible. Despite this, the greenhouse can be assembled quickly, right from the package. The entire cover, including doors, are constructed with polyethylene plastic with woven backing, which is UV resistant and fire retardant. Heat welded seams feature in all fabric components.

Ratchet straps come standard with Rhino Shelters. The shelter cover never loosens or sags, thanks to the strong webbing material used in the ratchet strap. The tight fit allows the ratchet straps to withstand much higher snow loads than ordinary rope.

The greenhouse contains one full-width double-zippered door and one 36″ manway door. The two doors greatly benefit mobility and ventilation. Plants can be suspended from the top and edges, thanks to four purlin arches.



Exclusive Extended Storage Features

  • Heavy Duty Galvanized Finish on All Steel Frame
    Components for Maximum Strength & Long Life
  • Easy Bolt Together Design – all Pre-drilled & Cut
  • Wind Brace Support on Both Sides
  • Two(2) Double Zipper Doors with Bottom Pockets
  • Protective Plastic Tube End Caps – All Open Ends
  • Standard Thread Plated Hardware Kit with Retaining
    Nuts & Protective SS Washers
  • Quick Assembly Wrench included
  • Heavy Duty Poly Rope for Main Cover Tie Down
  • Heavy Duty Grommets on Cover & Doors
  • Assembles in 2 hrs.
  • Two Box Shipment – easily unloaded and transported (shown right)

Exclusive Greenhouse Features

  • Heavy Duty Galvanized Finish on All Steel Frame Components for Maximum Strength & Long Life
  • All Pre-Drilled, Easy Bolt Together Assembly
  • Ratchet Straps for a Drum Tight Fit
  • Wind Brace Support on Both Sides
  • Double Zipper Door with Bottom Pocket
  • Bungee Cord Tie Backs for Doors
  • Protective Plastic Tube End Caps – All Open Ends
  • Standard Thread Plated Hardware Kit with Retaining Nuts & Protective SS Washers
  • Quick Assembly Wrench
  • Heavy Duty Poly Rope for Main Cover Tie Down
  • Heavy Duty Grommets on Cover & Doors
  • Complete Anchoring System Included
  • 8oz. CPAI-84 Polyethylene Translucent Cover and Door
  • Average Install time – 2 Hours
  • 344 lbs. Shipped in Two (2) Boxes Via Motor Freight
  • Nominal Size
    • 12′ Wide x 24’ Long x 8′ High
  • Arches
    • Seven (7) on 48″ spacing
    • 1-5/8″ diameter frame members
  • Standard End Door Size
    • Manway Door: 6’W x 8’H
    • Double Zipper Back Panel: 10’ W x 6’H
  • Available Colors
    • Translucent
  • Shipping Weight
    • 344 Lbs. in Two (2) boxes shipped via motor freight
  • Box Dimensions
    • House Style
    • Box 1: 63.5″ Long x 17.5″ Wide x 8″ High
    • Box 2: 67″ Long x 21.5″ Wide x 8.5″ High
    • Round Style
    • Box 1: 57.5″ Long x 15.37″ Wide x 7.5″ High
    • Box 2: 73.62″ Long x 21.5″ Wide x 9″ High
  • Main Cover
    • UV protected 24 mil, fabric backed poly. 10oz. weight
  • Fire Retardant Standard
    • Main Cover & Doors meet CPAI -84 Section 5
  • Anchors
    • Six ( 6 ) 36″ Anchors with U-Bolts & 36″Drive Rod Std.
  • Stock Number
    • 12x24x8(*)HSK
    • * – Color Prefix: Green, Grey, etc.
  • the product spec sheet
  • the assembly manual
Empty tab. Edit page to add content here.